Features
- 5A Control relay
- 0.5A Alarm Relay
- Digital Display
- Internal Buzzer
- 4-20mA current loop
- DVP-120 compatible
- ETL Listed
- 2 year sensor, field replaceable
Applications
Diesel exhaust,
garages, warehouses,
loading docks, bus
depots, firehouses,
ambulance bays,
maintenance facilities
Mode: Stand Alone or System
Area: 5000 ft2 (84 m2)
The Macurco TX-6-ND is a low voltage, dual relay Nitrogen Dioxide (NO2) detector, controller and transducer.
The TX-6-ND has selectable 4-20 mA output, buzzer and digital display options. It is an electronic detection
system used to measure the concentration of NO2 and provide feedback and automatic exhaust fan control
to help reduce NO2 concentrations in parking garages, maintenance facilities or other commercial
applications. The TX-6-ND is a low level meter capable of displaying from 0-20 ppm of Nitrogen Dioxide.
Selectable options include:
- Fan relay actuation: selectable from 0.2 to 5.0 ppm NO2
- Output: Fan relay, Alarm relay and 4-20mA current loop
- Controls: Digital display (0-20 ppm), buzzer, fan delay, fan minimum runtime
Installation
- Mounts on a standard 4” x 4” electrical box
- 5 A SPDT fan relay controls valves, louvers or exhaust fans
- 0.5 A N.O. or N.C alarm relay connects to warning devices or control panels
- 4-20mA current loop - compatible with the Macurco DVP-120 Control Panel
- Factory calibrated
Other Features
- Supervised system design: detector problem will cause the fan & alarm relay to activate
- Optional calibration kit allows the TX-6-ND to be field tested and calibrated
- ETL Listed to UL 61010-1
Location
A TX-6-ND is normally mounted at breathing level, about 5 feet (1.5 meters) above the floor on a wall or column
in a central area where air movement is generally good. The unit, on average, can cover about 5,000 sq. ft.
(465 sq. meters). The coverage depends on air movement within the room or facility. Extra detectors may be
needed near any areas where people work or where the air is stagnant. The TX-6-ND mounts on a 4x4 electrical
box supplied by the contractor. Do not install the TX-6-ND inside another box unless it has good air flow through
it. Do NOT mount the TX-6-ND where the normal ambient temperature is below below 0°F or exceeds 125°F
(below -18°C or above 52°C).