Accurate and easy to use, the Dräger Pac 3500 is ideal for
industrial personal monitoring applications. Providing quick
detection of carbon monoxide, hydrogen sulfide or oxygen, this
robust single gas detector has a lifetime of 2 years and is made
specifically to fit industrial safety requirements.
SMALL AND ROBUST HOUSING
Dräger Pac 3500’s impact-resistant housing features a protective rubber coating
and is impervious to corrosive chemicals.
Dräger Pac 3500 meets the requirements of IP 65 to ensure operation even
when splashed with water. A crocodile
clip securely fastens the instrument to
the user’s clothing and can be adjusted
to allow for individual preferences.
To ensure continuous operation even when
the unit is in a shirt pocket, the instrument’s sensor has been carefully positioned to allow gas intake from both the
top and the front of the device.
MINIATURE SENSOR TECHNOLOGY
Incorporating the latest miniature Dräger
XXS sensor technology, the Dräger Pac
3500 has been specifically developed for
use in personal monitoring and handheld
applications. The robust and pressure
compensated sensors reliably detect
CO, H 2 S and O 2 and because of the very
low sensitivity drift, the Dräger Pac 3500
can be used over a 2 year period without
Easily seen at a glance, the large display
shows both the gas concentration and
the measurement unit. Alternatively, the
instrument can be configured to show
only the gas detected. The concentration
is then displayed only when the set alarm
level has been exceeded.
Language-free for quick, at a glance
status checks, this continuous numeric
display can also be back-lit to improve
readability in darker conditions. Colored
overlays are available to distinguish the
instrument gas type at a distance.
ALARMS AND WARNINGS
In addition to a vibrating alarm, the Dräger
Pac 3500 emits an audible, multi-tone signal and a clear, 360° visual alarm via bright,
flashing LEDs at the top and base of the
instrument. The alarm threshold levels can
be individually adjusted to comply with
company policy or other standards using
Complete with an infrared interface and
able to store up to 60 events with dates
and times, the Dräger Pac 3500 can be
easily linked to a PC via a connecting
cradle. This means that significant events
such as switching on or off, gas and battery
alarms, error codes, configuration changes,
fresh air calibrations and bump tests can
be downloaded, printed and stored centrally
for future reference or reporting purposes.
QUICK AND RELIABLE BUMP TESTING
Bump or function tests are used to
check if the instruments are functioning
correctly. Bump testing allows users to
test equipment against a known gas concentration on a regular basis. Featuring
adjustable bump test and calibration
intervals, the Dräger Pac 3500 alerts the
user when bump tests or calibration are
required. If this warning is ignored or a
test is unsuccessful, the instrument can
automatically display an “out of order”
Performed together with the Dräger
Bump Test Station, a typical bump test
takes between 8 and 15 seconds and
requires no additional power so that the
test can be performed on site. Each test
result is automatically stored in the event
logger. An optional mobile printer/interface provides printed results and stores
700 tests for download.
If necessary, a fresh air calibration can
be carried out during the start-up sequence.
All other calibration options are only
accessible via a password-protected menu.