E2s Is-mc1-r/a | Horn + Beacon | Zone 0 | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

E2S   IS-MC1-R/A

SKU# (3691)



E2S IS-MC1-R/A

ALARM SIGNAL DEVICES / ZONE 0
HORN + BEACON

  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
E2S IS-mC1 IS-minialert compact combined Alarm Sounder 100dB(A) and LED Beacon. 16-28VDC. Zener barrier or galvanic isolator required to run both units. Stainless Steel fixings. IP65. ATEX, IECEx and GOST-R approved for Zone 0. FM approved for Class 1 Div 1 and Class 1 Zone 0.

IS-MC1-R/A   
Please Email us your request for quote   

Lens colour
Metric Adaptor

  [  2 Weeks  ]

The IS-mC1 is a compact combined 100dB(A) alarm sounder and L.E.D. beacon - only one Zener barrier or galvanic isolator required to run both sounder & beacon or alternatively the unit can be operated as individual signals.

Approvals include ATEX, IECEx and GOST-R for Zone 0 applications and FM approval for Class I Division 1 and Class I Zone 0 applications.

Features:
  • Input overload and reverse current protection
  • End of line resistor certified
  • Auto synchronised sound output
  • Prismatic lens optimises L.E.D effectiveness
  • Available with custom tone configurations
Approvals:

  • ATEX certificate: SIRA05ATEX2 084X,
    EN 60079-0 : 2006, EN 60079-11 : 2007,
    EN 60079-26 : 2007
  • IECEx certificate: IECEx SIR 06.0045X,
    IEC 60079-0 : 2007, IEC 60079-11 : 2 006,
    IEC 60079-26 : 2006
  • FM approved: Class 3600 1998, Class 3610 1999,
    Class 3810 2005
  • GOST-R certificate: PO CC GB.JB05.B03365

Specification
Alarm sounder:
Nominal output: 100dB(A) @ 1m +/- 3dB - Tone 2 *[91dB(A) @ 10ft/3m]
No. of tones: 49 (UKOOA / PFEER compliant)
No. of stages: 3
Volume control: Max. 100dB(A); Min. 90dB(A) - Tone 2
Effective range: 40m/131ft @ 1KHz
L.E.D. Beacon:
Light source: Array of 6 high intensity L.E.D’s.
L.E.D. colours: Red, Amber, Blue, Green & Clear
Flash modes: Double flash at 2Hz and 1Hz
Effective intensity cd: 23cd* - measured ref. to I.E.S.
General:
Voltage: 16-28vdc via Zener barrier or galvanic isolator
Combined current: approx: 30mA typical when powered from 24v supply via 28v 300 Ohm Zener barrier.
Ingress protection: IP65
Rating: Continuous
Housing material: UL94V0 & 5VA FR ABS & PC
Housing Colour: RAL3000 Red
Cable entries: 2 x M20 clearance gland knockouts.
Custom configurations also available.
Terminals: 0.5 to 2.5mm2
Operating temp: -40° to +60°C [-40 to +140°F]
Storage temp: -40° to +70°C [-40 to +158°F]
Relative humidity: 90% at 20°C [68°F]
Export Info
Made inUnited Kingdom
Harmonized Tariff Code (HTC)8531800010

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> HORN + BEACON :    92 Items found.
SON4BDC024R/A
(3642)

E2S  SON4BDC024R/A

E2S SON4B Alarm Sounder 100dB(A) and Filament Lamp Beacon with 1Hz flash rate. Compact and high output sounder. Stainless steel fixings. 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
4906-9127
(7079)

TYCO  4906-9127

Tyco Simplex 4906-9127 Multi-Candela Audible/Visible Notification with high output Xenon Strobe and Synchronized Flash. Non-Addressable. Wall or ceiling mount. 24 VDC. UL, ULC, CSFM Listed. FM Approved.

Configure

 
SON4LDC012R/R
(3643)

E2S  SON4LDC012R/R

E2S SON4L Alarm Sounder 100dB(A) and LED Beacon with 2Hz flash rate. Compact and high output sounder. Stainless steel fixings. 12VDC, 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
P2R
(4148)

SYSTEM SENSOR  P2R

System Sensor P2R 2-Wire Horn Strobe at 88+ dbA. Standard cd (15, 15/75, 30, 75, 95, 110, and 115 candela settings). Plug-in design. Red housing. 12 or 24 VDC Operation. For celling or wall mounting. cUL, FM and MEA Approved.

Configure

 
P2RK
(6853)

NOTIFIER  P2RK

NOTIFIER by Honeywell P2RK 2-wire horn and multicandela strobe. Wall mount. Red. 12 or 24 volts. 1 flash per second. For outdoor. NEMA 4X. IP56. UL, ULC, FM, MEA and CSFM Approvals.

Configure

 
H100TF024G/A
(3588)

E2S  H100TF024G/A

E2S H100TF Trumpet Horn 100dB(A) and Beacon with 5W flashing filament lamp. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
SON4DC024G/A
(3641)

E2S  SON4DC024G/A

E2S SON4 Alarm Sounder 104dB(A) and Xenon Beacon with 1Hz flash rate. Compact and high output sounder. Stainless steel fixings. 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
4906-9154
(7083)

TYCO  4906-9154

Tyco Simplex 4906-9154 Multi-tapped Speaker with Multi-Candela Synchronized Strobe (selectable intensity as 15 cd, 30 cd, 75 cd, or 110 cd). Non-Addressable. Rugged, high impact, flame retardant thermoplastic housing. Ceiling mount. 24 VDC. UL, ULC, CSFM Listed. FM Approved.

Configure

 
H100BL030G/A
(3592)

E2S  H100BL030G/A

E2S H100BL Signal Horn 100dB(A) and LED Beacon. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 12-30VDC or 90-260VAC Versions. IP65. GOST-R Approved.

Configure

 
SONFL1XDC012R/A
(3639)

E2S  SONFL1XDC012R/A

E2S SONFL1X compact and high output Alarm Sounder 100dB(A) and 5 Joule Xenon Strobe Beacon with 1Hz flash rate. Low current consumption and high SPL. Stainless steel fixings. 12VDC, 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved. Optional UL & cULs version.

Configure

 
SONFL1HDC024G/A
(5134)

E2S  SONFL1HDC024G/A

E2S SONFL1H compact and high output Alarm Sounder 100dB(A) andhigh output L.E.D. beacon (L101H). Stainless steel fixings. 115VAC. IP66. VdS, GOST-R, UL & cULs approved.

Configure

 
H100TL030G/A
(3590)

E2S  H100TL030G/A

E2S H100TL Signal Horn 100dB(A) with Trumpet and LED Beacon. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 12-30VDC or 90-260VAC Versions. IP65. GOST-R Approved.

Configure

 
H100BX024G/A
(3591)

E2S  H100BX024G/A

E2S H100BX Signal Horn 100dB(A) and Xenon Strobe Beacon with 0.75Hz flash rate. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC/AC, 115 VAC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
HS-B
(5735)

MACURCO  HS-B

Macurco HS Horn and Strobe for Macurco DVP-120 & DVP-120M control panels and Macurco 6 & 12 Series detectors. High power cool white LED. 15, 30, 75 or 110cd strobe candela. Continuous or Temporal 4 audio tones. 24VDC.

Configure

$177.87 
AB105RTHDC012G/A
(3599)

E2S  AB105RTHDC012G/A

E2S AB105RTH Alarm Sounder 112dB(A) and Rotating Beacon with 25W halogen bulb. Compact with high output signal. Automatic synchronisation. Stainless Steel fixings. 12VDC, 24VDC, 115VAC or 230VAC Versions. IP65. VdS Approved.

Configure

 
H100TX024G/A
(3589)

E2S  H100TX024G/A

E2S H100TX Trumpet Horn 100dB(A) and Xenon Strobe Beacon with 0.75Hz flash rate. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC/AC, 115 VAC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
AB105STRDC012G/A
(3597)

E2S  AB105STRDC012G/A

E2S AB105STR Alarm Sounder 112dB(A) and Xenon Strobe Beacon with 1Hz flash rate. Compact with high output signal. Automatic synchronisation. Stainless Steel fixings. 12VDC, 24VDC, 48VDC, 24VAC, 115 VAC or 230VAC Versions. IP65. VdS Approved.

Configure

 
AL100XDC024R/R
(3551)

E2S  AL100XDC024R/R

E2S AL100X Alarm Horn Sounder (A100) 104dB(A) and 5 Joule Xenon Strobe Beacon (L101X). 115VAC, 230VAC, 24VAC, 24VDC or 48VDC Versions. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

Configure

 
AL100HDC024R/A
(4429)

E2S  AL100HDC024R/A

E2S AL100H Alarm Horn Sounder (A100) 104dB(A) and High Output LED Beacon (L101H). 24VDC. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

Configure

 
AL100SONTELR/A
(5128)

E2S  AL100SONTELR/A

E2S AL100SONTELFLASH Telephone Initiated Alarm Sounder 100dB(A) and High Output 5 Joule Xenon Beacon. 230VAC. Stainless steel fixings. IP66. GOST-R Approved.

Configure

 
Page: 1 | 2 | 3 | 4 | 5 | All
() Reviews | Write One      
....

IS-MC1-R/A
E2S / Alarm Signal Devices
Zone 0 / Horn + Beacon
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.