Medc Cu1hb024f06rnnnn1bn | Horn + Beacon | Zone 1 And Zone 2 | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

MEDC   CU1HB024F06RNNNN1BN

SKU# (4161)



MEDC CU1H_B_024F06RNNNN1BN

ALARM SIGNAL DEVICES / ZONE 1 AND ZONE 2
HORN + BEACON

$2,342.03  [9 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
MEDC CU1 Combination Unit (Beacon Sounder) with 27 output tones, Zone 1, Zone 2 and non-Ex use, Up to 116 dB(A), IP66 and 67, intended for use in potentially explosive gas atmospheres. High Temperature version. -50C to +60C. Available Certifications: ATEX, IECEx, CENELEC, GOST R and K, BASEEFA and Inmetro.

CU1HB024F06RNNNN1BN   
2,342.03

Unit Type
Certification
Voltage
Power
Flashrate
Lens Colour
Label
Options
Options
Options
Entries
Finish

  [  9 Weeks  ]
251 Variants of base SKU / 30 Shown below

This range of beacon/sounder units, intended for use in potentially explosive gas atmospheres, has a power rating of up to 10 watts (sounder) and 10 joules (beacon) and is suitable for use in the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The flamepaths, flare and body are manufactured from a UV stable glass reinforced polyester. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths.

FEATURES

  • Zone 1, Zone 2 & non-Ex use.
  • Exde IIB T3.
  • ATEX approved, Ex II 2 G.
  • IECEx approved, Gb.
  • CENELEC approved.
  • GOST 'R' & 'K' certified.
  • BASEEFA certified.
  • Brazilian (Inmetro) certified.
  • IP66 and 67.
  • Certified temperature: –50°C to +60°C*.
  • Up to 116 dB(A)*.
  • Version with independent beacon/sounder operation now available.
  • 27 Tones, user selectable (dual tone option - d.c. voltage).
  • Tones comply with UKOOA/PFEER guidelines
  • Integral volume control
  • GRP corrosion-free flamepath.
  • Ratcheted swivel mouting stirrup.
  • Stainless steel fixtures.
  • Tapered flamepath.

Specification
Certification Certified to IEC60079-0, IEC60079-1, IEC60079-7
Certified to EN60079-0, EN60079-1, EN60079-7
ATEX Ex de Cert No.Baseefa04ATEX0273X
Ex de IIB T3
IECEx Ex de Cert No.IECEx BAS 11.0149X
Ex de IIB T3 Gb
Zones 1 & 2.
Brazilian (Inmetro) Certified: BR-Ex de IIB T3
GOST R Certification: 2 EXde IIB T3
Russian Fire Approval.
GOST K Certification: Exde IIB T3
American Bureau of Shipping Type Approval CU1S, CU1SW, CU1H, CU1HW only.
Material Body, flares & covers: Glass Reinforced Polyester (GRP).
Lens: Glass
Guard fitted as standard
Cover screws & mounting strap: Stainless steel.
ABS flare.
Finish: Natural black or painted to customer specification.
Certified Temp: Standard unit: -50°C to +50°C (CU1-S & CU1-SP).
High temperature unit: -50°C to +60°C (CU1-H & CU1-HP)†.
†Please contact Cooper MEDC Technical Sales.
Weight: 6.5kg approx.
Ingress Protection: IP66 & IP67./td>
Entries: Up to 2 x M25, 2 x M25 ISO, 2 x M20 with 1/2" NPT adaptor or 2 x M25 with 3/4" NPT adaptors into termination (Exe) chamber.
Terminals: 8 x 4.0mm2.
Output: Standard unit: sounder 10 watts, beacon 5 or10 joules.
High temp. unit: sounder 5 watts, beacon 5 or10 joules.
Relay Initiate: Available on all versions – operates with 24V d.c. initiate supplies only.
Mounting: Stainless steel bracket with ratchet facility.
Earth Continuity: Available as an option.
Labels: Duty and tag label option to customer’s requirements.
Sound Output: Sound Standard unit: 116dB(A) ± 3 dB(A) (tone dependent).
High temp. unit: 110 dB(A) ±3 dB(A) (tone dependent).
Tone Selection: 27 user selectable tones.
Two Stage Unit: Switchable between any two tones by either: (i) Reversing the polarity* of the supply, or
(ii) By a 3 wire common +ve system, switching between the two – ve lines.
If a two stage unit is ordered with either Independent Sounder/Beacon operation or Telephone or Relay Initiate, it will be wired for reverse polarity tone switching only, to allow loop in, loop out installation. Note: Two stage unit available in d.c. versions only.
*Will not affect beacon operation
Current Consumption at full power:
Input Voltage 10 Joule Beacon Sounder@ 60 fpm 5 Joule Beacon Sounder@ 60 fpm
24Vd.c. 1387mA 700mA†
48Vd.c. 864mA
110Va.c. 365mA
120Va.c. 417mA
230Va.c. 172mA
240Va.c. 182mA
250Va.c. 241mA

In addition to the 10 Joule CU1, MEDC offers a 5 Joule/110dB(A), 24Vd.c. version.
Details are available on request.

Integral volume control (Not applicable to CU1H)
*Nominal Output (dBa) Input Current (mA)
90 460
95 520
100 670
102 720
105 1000
107 1220
116 1387

* Output measured with 24V input voltage. Tone set to 970Hz continuous, with 10 joule beacon set to 60 fpm.

Export Info
Made inUnited Kingdom

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> HORN + BEACON :    92 Items found.
E2XC1LD2FAC115CN1A1B/A
(6421)

E2S  E2XC1LD2FAC115CN1A1B/A

E2S E2xC1LD2F Combination Alarm Horn & LED Beacon for hazardous locations. Up to 116dB(A). Dual M20x1.5 or 1/2"NPT entries. IP66. UL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

Configure

 
D2XC1X05DC024CN1A1R/C
(4427)

E2S  D2XC1X05DC024CN1A1R/C

E2S D2xC1X05 Alarm Horn Sounder 116dB(A) and 5 Joule Xenon Strobe Beacon. Low current consumption and high SPL. Type 4/4X, IP66 enclosure. Suitable for the harshest of hazardous location environments. 4 remotely selectable alarm stages. 64 alarm tone frequencies. UL approved for Class I Div 2 and Class II Div 2. IECEx and ATEX Approved.

Configure

 
GDS-450X-1-0/0/1-1-0
(4712)

GDS  GDS-450X-1-0/0/1-1-0

GDS GDS-450X Alarm Station Annunciator with Two Strobes and Horn. Corrosion-resistant stainless steel mounting plate. 24VDC or 110VAC configurations. Suitable for Class I Division 2 Hazardous Areas.

Configure

 
BEXCTS11005DR230AC-GN
(4406)

E2S  BEXCTS11005DR230AC-GN

E2S BExCTS110-05 flameproof telephone initiated and Omni-directional Alarm Horn 117dB(A) and Green Xenon Beacon. 32 selectable sounds. LM6 aluminium enclosure. 230 VAC.Suitable for Zone 1 & Zone 2 applications. Two M20 cable entries. IP66/67. ATEX, IECEx and GOST-R Approved.

Configure

 
D2xC2LD2DC024CN0H1R/C
(6414)

E2S  D2xC2LD2DC024CN0H1R/C

E2S D2xC2LD2-H Haz Loc Synchronized Horn & LED Beacon tested to UL464 & UL1971. 24VDC. Up to 116dB(A). Up to 180cd. 2 × 1/2"NPT entries. IP66. UL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.



 
D2xC2LD2DC024CN1A1R/C
(6415)

E2S  D2xC2LD2DC024CN1A1R/C

E2S D2xC2LD2 Haz Loc Horn & LED Beacon tested to UL1638. Up to 116dB(A). Up to 180cd. 2 × 1/2"NPT entries. IP66. UL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.

Configure

 
D2XC1X10DC024CN1A1R/C
(4428)

E2S  D2XC1X10DC024CN1A1R/C

E2S D2xC1X10 Alarm Horn Sounder 116dB(A) and 10 Joule Xenon Strobe Beacon. Low current consumption and high SPL. Type 4/4X, IP66 enclosure. Suitable for the harshest of hazardous location environments. 4 remotely selectable alarm stages. 64 alarm tone frequencies. UL approved for Class I Div 2 and Class II Div 2. IECEx and ATEX Approved.

Configure

 
D2xC2XH1DC024CN0A1R/C
(6416)

E2S  D2xC2XH1DC024CN0A1R/C

E2S D2xC2XH1 auto-synchronizing Horn & 5 Joule Xenon Strobe tested to UL464 & UL1971. 24VDC. Up to 116dB(A). Up to 250cd. 2 × 1/2"NPT entries. IP66. UL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.



 
BEXDCS11005D_24DC-AM
(3674)

E2S  BEXDCS11005D24DC-AM

E2S BExDCS110-05D flameproof Alarm Horn 117dB(A) and 5 Joule Xenon Strobe. LM6 aluminium enclosure. Suitable for Zone 1, 2, 21 & 22 applications. Two M20 cable entries. IP66/67. ATEX, IECEx and GOST-R (1ExdIICT4) Approved.

Configure

 
D2xC2XH2DC024CN0A1R/C
(6417)

E2S  D2xC2XH2DC024CN0A1R/C

E2S D2xC2XH2 auto-synchronizing Horn & 10 Joule Xenon Strobe tested to UL464 & UL1971. 24VDC. Up to 116dB(A). Up to 500cd. 2 × 1/2"NPT entries. IP66. UL approved for Class I/II Div 2, Class I Zone 2/Zone 22. IECEx and ATEX certified.



 
BEXDCS11005DR115AC-RD
(4405)

E2S  BEXDCS11005DR115AC-RD

E2S BExDCS110-05D-R flameproof Alarm Horn 117dB(A) and 5 Joule Xenon Red Strobe. Omni-directional. 115 VAC. LM6 aluminium enclosure. Suitable for Zone 1, 2, 21 & 22 applications. Two M20 cable entries. IP66/67. ATEX, IECEx and GOST-R (1ExdIICT4) Approved.

Configure

 
BEXDCS110L1D_24DC-AM
(3677)

E2S  BEXDCS110L1D24DC-AM

E2S BExDCS110-L1D flameproof Alarm Horn 117dB(A) and LED Beacon with 9 user selectable operation modes. LM6 aluminium enclosure. Suitable for Zone 1, 2, 21 & 22 applications. Two M20 cable entries. IP66/67. ATEX, IECEx, GOST-R (1ExdIICT4) and SIL1 Approved.

Configure

 
XB13-DB3BWN0481BNNNNN
(6047)

MEDC  XB13-DB3BWN0481BNNNNN

MEDC XB13/DB3B Strobe/Horn Combination Unit mounted on a sturdy, drilled, painted, stainless steel, 2 way baseplate. Heavy Duty Industrial & Marine Xenon 10J. Sounder up to 110dB(A). IP66 and IP67.

Configure

$1,557.17 
BEXCS11005DPRDC012AB1A1R/A
(3675)

E2S  BEXCS11005DPRDC012AB1A1R/A

E2S BExCS110-05-R flameproof Omnidirectional Horn 117dB(A) and 5 Joule Xenon Strobe. LM6 aluminium enclosure. Suitable for Zone 1 & Zone 2 applications. Two M20 cable entries. IP66/67. ATEX, IECEx and GOST-R (1ExdIICT4) Approved.

Configure

 
BEXCS110L2DPFDC024AB1A1R/A
(3676)

E2S  BEXCS110L2DPFDC024AB1A1R/A

E2S BExCS110-L2D flameproof Alarm Horn 117dB(A) and LED Beacon with 7 user selectable operation modes. LM6 aluminium enclosure. Suitable for Zone 1 & Zone 2 applications. Two M20 cable entries. IP66/67. ATEX and IECEx Approvals.

Configure

 
BEXCS110L2DPRDC024AB1A1R/A
(4407)

E2S  BEXCS110L2DPRDC024AB1A1R/A

E2S BExCS110-L2-R flameproof Omni-directional Alarm Horn 117dB(A) and Red LED Beacon with 7 user selectable operation modes. LM6 aluminium enclosure. Suitable for Zone 1 & Zone 2 applications. Two M20 cable entries. IP66/67. ATEX and IECEx approvals.

Configure

 
BEXCS11005DPFDC012AB1A1R/A
(3673)

E2S  BEXCS11005DPFDC012AB1A1R/A

E2S BExCS110-05D flameproof Alarm Horn 117dB(A) and 5 Joule Xenon Strobe. LM6 aluminium enclosure. Suitable for Zone 1 & Zone 2 applications. Two M20 cable entries. IP66/67. ATEX, IECEx and GOST-R (1ExdIICT4) Approved.

Configure

 
D1xC1X05FDC024AB1A1R/A
(4413)

E2S  D1xC1X05FDC024AB1A1R/A

E2S D1xC1X05F Alarm Horn 117dB(A) and 5 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Division 1, Zone 1 & 20 applications. UL and CSA Approved.

Configure

 
D1xC1X05RDC024AB1A1R/A
(4414)

E2S  D1xC1X05RDC024AB1A1R/A

E2S D1xC1X05R Radial Alarm Horn 115dB(A) and 5 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Division 1, Zone 1 & 20 applications. UL and CSA Approved.

Configure

 
D1xC2X05FDC024AB1A1R/A
(4417)

E2S  D1xC2X05FDC024AB1A1R/A

E2S D1xC2X05F Alarm Horn 125dB(A) and 5 Joule Xenon Strobe. High output. Type 4/4x, IP66 aluminium enclosure. Suitable for all Class I & II Division 1, Zone 1 & 20 applications. UL and CSA Approved.

Configure

 
Page: 1 | 2 | 3 | 4 | 5 | All
() Reviews | Write One      
....

CU1HB024F06RNNNN     $2,342
MEDC / Alarm Signal Devices
Zone 1 And Zone 2 / Horn + Beacon
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.