Gasdetectorsusa.com:gas Leak And Flame Detectors, Analyzers, Alarm Devices And Calibration Gas

(6610)

PORTAGAS CYL-90403365

Calibration Gas Methane/Biomethane/Biogas (CH4) 50% VOLUME Balance Nitrogen, 100 Liter FAL (Flammable Aluminum Cylinder) C-10 Inlet (Made by Portagas)

Configure

$202.77

(6999)

PORTAGAS CYL-90403444

Calibration Gas Methane (CH4) 50% v/v Balance Nitrogen, 34 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$103.16

(6735)

PORTAGAS CYL-90403891

Calibration Gas mixture: 15 ppm Hydrogen Sulfide (H2S) 100 ppm Carbon Monoxide (CO) 1% Carbon Dioxide (CO2) 2.5% Methane (CH4) (50% LEL) 18% Oxygen (O2) Nitrogen Balance 116 Liter GAL C-10 Inlet Portagreen Aluminum Cylinder. (Made by Portagas)

Configure

$368.95

(6997)

PORTAGAS CYL-90410379

Calibration Gas Nitrogen Dioxide (NO2) 40 ppm Balance Air 58 Liter GAL C-10 Inlet Portagreen Aluminium Cylinder. (Made by Portagas)

Configure

$252.43

(7108)

PORTAGAS CYL-90412957

Calibration Gas TERT-BUTYL MERCAPTAN TBM (C4H10S) 5 ppm (18 mg/m3) balance Nitrogen 58 Liter GAL C-10 Inlet Cylinder. (Made by Portagas)

Configure

$687.38

(640)

MACURCO DVP-120

Macurco DVP-120 control panel features 12 sensor inputs, three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,302.82

(6823)

MACURCO DVP-1200

Macurco DVP-1200 control panel for up to 192 addressable detectors. Includes 4 Relays (Up to 12), 3 4-20mA analog outputs, 4 24VDC drivers, 3 RS-485 channels and BACnet IP server output. NEMA4X enclosure. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. ETL Listed to UL 2017

Configure

$2,764.23

(6227)

MACURCO DVP-120B

Macurco DVP-120B Addressable Detection and Ventilation Panel with BACnet MS/TP output. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on two channels and 12 4-20mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,752.43

(3973)

MACURCO DVP-120M

Macurco DVP-120M Addressable Detection and Ventilation Panel. Modbus-Enabled with up to 87 Modbus RS-485 addressable sensors on three channels of 29 sensors per channel. Features 12 4-20mA sensor inputs (for a total of 99 channels) , three 10 amp output relays, horn and strobe drivers, Internal 90 dbA buzzer, NEMA1 enclosure, and status LEDs. Compatible with MACURCO fixed gas transducers CM-6, GD-6, TX-6, OX-6, CM-2B, CM-3, CM-4, ND-2 and GT-11A over 4-20mA current loops. 90 – 250 VAC. Multi-Channel controller and alarm center for natural gas, methane, propane, hydrogen, carbon monoxide, ammonia, nitrogen dioxide and hydrogen sulfide. Optional LADBS approval.

Configure

$1,444.88

(4271)

BW G0042-H25

BW Calibration Gas mixture for Hydrogen sulfide (H2S) 25 ppm, Balance Nitrogen, 58L aluminum cylinder. (requires REG-DF-1 or REG-0.5)

(291)

GDS GDS-49-1-29-05

GDS GDS-49 Remote Gas Detector Transmitter with Stainless steel sensor head configured for Nitrogen Dioxide (NO2) with range 0-20 ppm. 2-Wire 4-20 mA transmitter.

(3336)

GDS GDS-58DXP-0-29-05-00-00/0-0

GDS GDS-58DXP Dual Channel Sample Draw Monitor with local stainless steel sensor head configured for Nitrogen Dioxide (NO2) with range 0-50 ppm to 0-400 ppm. Brushless DC sample pump, Fault and Low Flow Warning. 24VDC. Includes high resolution LCD Display, two 4-20mA outputs and MODBUS serial slave port. Optional relays output. CSA and UL Approved for Hazardous Locations. Class I Div 1.

Configure

(5980)

CALIBRATION TECHNOLOGIES GG-NO2-10-EXP

CTI GG-NO2-EXP Explosion Proof Electrochemical Gas Sensor for Nitrogen Dioxide (NO2) 0-10 ppm. 4-20 mA output, 24VDC power supply. Explosion Proof Copper-free aluminum enclosure for Class l, Div 1 & 2, Groups B, C & D. CSA, UL, FM, ATEX and IECEx approved.

Configure

$1,341.51

(5982)

CALIBRATION TECHNOLOGIES GG-NO2-B-10

CTI GG-NO2-B Electrochemical Gas Sensor for Nitrogen Dioxide (NO2) 0-10 ppm. 4-20 mA output, 24VDC power supply. NEMA 3RX polycarbonate housing. CSA and UL approved.

Configure

$1,088.34

(3439)

GDS GM/TX/01-29-05/00-00-00/1-0900

GDS GASMAX TX Stand-Alone Wireless Gas Monitor with stainless steel sensor head and integrated sensor configured for Nitrogen Dioxide (NO2) with range 0-20 ppm. Battery-Powerded. 900 MHz or 2.4 GHz Integrated Modems. LCD Display and Aluminium Housing. FCC and IC approvals.

(3303)

GDS GMCX-03-29-05/00-00-00/0

GDS GASMAX CX 3-Wire Gas Detector with local stainless steel sensor head configured for Nitrogen Dioxide (NO2) with range 0-20 ppm, QVGA color TFT display, 4-20 mA output transmitter, Ethernet Modbus TCP RJ-45 port with built-in web server. Optional Alarm Relay Board (4x 5A SPDT) and RS-485 Modbus RTU. CSA Certified for Class I, Div 1, Grps B, C, D.

(1654)

GDS GMII-01-010-04/01-070-00/0-0

GDS GASMAX II 3-Wire Gas Detector with backlit LCD display and local stainless steel sensor head for Toxic Gases and second channel with backlit LCD display and local stainless steel sensor head for IR (Combustibles/CO2-Carbon Dioxide) or Catalytic Bead sensors, 4-20 mA output transmitter with optional Alarm Relay Board (3x 5A SPDT) and RS-485 Modbus RTU. Available electrochemical sensors for: Oxygen (O2), Carbon Monoxide (CO), Hydrogen (H2), Hydrogen Sulfide (H2S), Hydrogen Cyanide (HCN), Ethylene Oxide (C2H4O), Arsine (AsH3), Silane (SiH4), Hydrazine (N2H4), Nitric Oxide (NO), Nitrogen Dioxide (NO2), Mercaptan (TBM), Tetrahydrothiophene (THT) and Diborane (B2H6)

(239)

GDS GMII-03-029-05/00-000-00/0-0

GDS GASMAX II 3-Wire Gas Detector with backlit LCD display and local stainless steel sensor head configured for Nitrogen Dioxide (NO2) with range 0-20 ppm, 4-20 mA output transmitter with optional Alarm Relay Board (3x 5A SPDT) and RS-485 Modbus RTU. CSA Certified for Class I, Div 1.

(2288)

PORTAGAS HONEYWELL-GFV122-EQUIV

Calibration Gas Hydrogen Sulfide 25 ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$171.58

(2297)

PORTAGAS HONEYWELL-GFV177-EQUIV

Calibration Gas Sulfur Dioxide (SO2) 10 ppm Balance Nitrogen Size 58 Liter GAL C-10 Inlet Cylinder (Made by Portagas)

Configure

$171.58

Contact Imprint Privacy Terms and Conditions Newsletter
Partners: For inquiries relating to potential partnerships or joint venture ideas, send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080. Powered by: