Medc Cu1hb024f06rnnnn1bn | Horn + Beacon | Zone 1 And Zone 2 | Gasdetectorsusa
Gas Leak and Flame Detectors, Analyzers, Alarm Devices and Calibration Gas

MEDC   CU1HB024F06RNNNN1BN

SKU# (4161)



MEDC CU1H_B_024F06RNNNN1BN

ALARM SIGNAL DEVICES / ZONE 1 AND ZONE 2
HORN + BEACON

$2,342.03  [9 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
MEDC CU1 Combination Unit (Beacon Sounder) with 27 output tones, Zone 1, Zone 2 and non-Ex use, Up to 116 dB(A), IP66 and 67, intended for use in potentially explosive gas atmospheres. High Temperature version. -50C to +60C. Available Certifications: ATEX, IECEx, CENELEC, GOST R and K, BASEEFA and Inmetro.

CU1HB024F06RNNNN1BN   
2,342.03

Unit Type
Certification
Voltage
Power
Flashrate
Lens Colour
Label
Options
Options
Options
Entries
Finish

  [  9 Weeks  ]
251 Variants of base SKU / 30 Shown below

This range of beacon/sounder units, intended for use in potentially explosive gas atmospheres, has a power rating of up to 10 watts (sounder) and 10 joules (beacon) and is suitable for use in the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The flamepaths, flare and body are manufactured from a UV stable glass reinforced polyester. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths.

FEATURES

  • Zone 1, Zone 2 & non-Ex use.
  • Exde IIB T3.
  • ATEX approved, Ex II 2 G.
  • IECEx approved, Gb.
  • CENELEC approved.
  • GOST 'R' & 'K' certified.
  • BASEEFA certified.
  • Brazilian (Inmetro) certified.
  • IP66 and 67.
  • Certified temperature: –50°C to +60°C*.
  • Up to 116 dB(A)*.
  • Version with independent beacon/sounder operation now available.
  • 27 Tones, user selectable (dual tone option - d.c. voltage).
  • Tones comply with UKOOA/PFEER guidelines
  • Integral volume control
  • GRP corrosion-free flamepath.
  • Ratcheted swivel mouting stirrup.
  • Stainless steel fixtures.
  • Tapered flamepath.

Specification
Certification Certified to IEC60079-0, IEC60079-1, IEC60079-7
Certified to EN60079-0, EN60079-1, EN60079-7
ATEX Ex de Cert No.Baseefa04ATEX0273X
Ex de IIB T3
IECEx Ex de Cert No.IECEx BAS 11.0149X
Ex de IIB T3 Gb
Zones 1 & 2.
Brazilian (Inmetro) Certified: BR-Ex de IIB T3
GOST R Certification: 2 EXde IIB T3
Russian Fire Approval.
GOST K Certification: Exde IIB T3
American Bureau of Shipping Type Approval CU1S, CU1SW, CU1H, CU1HW only.
Material Body, flares & covers: Glass Reinforced Polyester (GRP).
Lens: Glass
Guard fitted as standard
Cover screws & mounting strap: Stainless steel.
ABS flare.
Finish: Natural black or painted to customer specification.
Certified Temp: Standard unit: -50°C to +50°C (CU1-S & CU1-SP).
High temperature unit: -50°C to +60°C (CU1-H & CU1-HP)†.
†Please contact Cooper MEDC Technical Sales.
Weight: 6.5kg approx.
Ingress Protection: IP66 & IP67./td>
Entries: Up to 2 x M25, 2 x M25 ISO, 2 x M20 with 1/2" NPT adaptor or 2 x M25 with 3/4" NPT adaptors into termination (Exe) chamber.
Terminals: 8 x 4.0mm2.
Output: Standard unit: sounder 10 watts, beacon 5 or10 joules.
High temp. unit: sounder 5 watts, beacon 5 or10 joules.
Relay Initiate: Available on all versions – operates with 24V d.c. initiate supplies only.
Mounting: Stainless steel bracket with ratchet facility.
Earth Continuity: Available as an option.
Labels: Duty and tag label option to customer’s requirements.
Sound Output: Sound Standard unit: 116dB(A) ± 3 dB(A) (tone dependent).
High temp. unit: 110 dB(A) ±3 dB(A) (tone dependent).
Tone Selection: 27 user selectable tones.
Two Stage Unit: Switchable between any two tones by either: (i) Reversing the polarity* of the supply, or
(ii) By a 3 wire common +ve system, switching between the two – ve lines.
If a two stage unit is ordered with either Independent Sounder/Beacon operation or Telephone or Relay Initiate, it will be wired for reverse polarity tone switching only, to allow loop in, loop out installation. Note: Two stage unit available in d.c. versions only.
*Will not affect beacon operation
Current Consumption at full power:
Input Voltage 10 Joule Beacon Sounder@ 60 fpm 5 Joule Beacon Sounder@ 60 fpm
24Vd.c. 1387mA 700mA†
48Vd.c. 864mA
110Va.c. 365mA
120Va.c. 417mA
230Va.c. 172mA
240Va.c. 182mA
250Va.c. 241mA

In addition to the 10 Joule CU1, MEDC offers a 5 Joule/110dB(A), 24Vd.c. version.
Details are available on request.

Integral volume control (Not applicable to CU1H)
*Nominal Output (dBa) Input Current (mA)
90 460
95 520
100 670
102 720
105 1000
107 1220
116 1387

* Output measured with 24V input voltage. Tone set to 970Hz continuous, with 10 joule beacon set to 60 fpm.

Export Info
Made inUnited Kingdom

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> HORN + BEACON :    92 Items found.
SON4BDC024R/A
(3642)

E2S  SON4BDC024R/A

E2S SON4B Alarm Sounder 100dB(A) and Filament Lamp Beacon with 1Hz flash rate. Compact and high output sounder. Stainless steel fixings. 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
4906-9127
(7079)

TYCO  4906-9127

Tyco Simplex 4906-9127 Multi-Candela Audible/Visible Notification with high output Xenon Strobe and Synchronized Flash. Non-Addressable. Wall or ceiling mount. 24 VDC. UL, ULC, CSFM Listed. FM Approved.

Configure

 
SON4LDC012R/R
(3643)

E2S  SON4LDC012R/R

E2S SON4L Alarm Sounder 100dB(A) and LED Beacon with 2Hz flash rate. Compact and high output sounder. Stainless steel fixings. 12VDC, 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
P2R
(4148)

SYSTEM SENSOR  P2R

System Sensor P2R 2-Wire Horn Strobe at 88+ dbA. Standard cd (15, 15/75, 30, 75, 95, 110, and 115 candela settings). Plug-in design. Red housing. 12 or 24 VDC Operation. For celling or wall mounting. cUL, FM and MEA Approved.

Configure

 
P2RK
(6853)

NOTIFIER  P2RK

NOTIFIER by Honeywell P2RK 2-wire horn and multicandela strobe. Wall mount. Red. 12 or 24 volts. 1 flash per second. For outdoor. NEMA 4X. IP56. UL, ULC, FM, MEA and CSFM Approvals.

Configure

 
H100TF024G/A
(3588)

E2S  H100TF024G/A

E2S H100TF Trumpet Horn 100dB(A) and Beacon with 5W flashing filament lamp. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
SON4DC024G/A
(3641)

E2S  SON4DC024G/A

E2S SON4 Alarm Sounder 104dB(A) and Xenon Beacon with 1Hz flash rate. Compact and high output sounder. Stainless steel fixings. 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved.

Configure

 
4906-9154
(7083)

TYCO  4906-9154

Tyco Simplex 4906-9154 Multi-tapped Speaker with Multi-Candela Synchronized Strobe (selectable intensity as 15 cd, 30 cd, 75 cd, or 110 cd). Non-Addressable. Rugged, high impact, flame retardant thermoplastic housing. Ceiling mount. 24 VDC. UL, ULC, CSFM Listed. FM Approved.

Configure

 
H100BL030G/A
(3592)

E2S  H100BL030G/A

E2S H100BL Signal Horn 100dB(A) and LED Beacon. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 12-30VDC or 90-260VAC Versions. IP65. GOST-R Approved.

Configure

 
SONFL1HDC024G/A
(5134)

E2S  SONFL1HDC024G/A

E2S SONFL1H compact and high output Alarm Sounder 100dB(A) andhigh output L.E.D. beacon (L101H). Stainless steel fixings. 115VAC. IP66. VdS, GOST-R, UL & cULs approved.

Configure

 
SONFL1XDC012R/A
(3639)

E2S  SONFL1XDC012R/A

E2S SONFL1X compact and high output Alarm Sounder 100dB(A) and 5 Joule Xenon Strobe Beacon with 1Hz flash rate. Low current consumption and high SPL. Stainless steel fixings. 12VDC, 24VDC, 24VAC, 115VAC or 230VAC Versions. IP66. VdS and GOST-R Approved. Optional UL & cULs version.

Configure

 
H100TL030G/A
(3590)

E2S  H100TL030G/A

E2S H100TL Signal Horn 100dB(A) with Trumpet and LED Beacon. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 12-30VDC or 90-260VAC Versions. IP65. GOST-R Approved.

Configure

 
H100BX024G/A
(3591)

E2S  H100BX024G/A

E2S H100BX Signal Horn 100dB(A) and Xenon Strobe Beacon with 0.75Hz flash rate. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC/AC, 115 VAC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
HS-B
(5735)

MACURCO  HS-B

Macurco HS Horn and Strobe for Macurco DVP-120 & DVP-120M control panels and Macurco 6 & 12 Series detectors. High power cool white LED. 15, 30, 75 or 110cd strobe candela. Continuous or Temporal 4 audio tones. 24VDC.

Configure

$177.87 
AB105RTHDC012G/A
(3599)

E2S  AB105RTHDC012G/A

E2S AB105RTH Alarm Sounder 112dB(A) and Rotating Beacon with 25W halogen bulb. Compact with high output signal. Automatic synchronisation. Stainless Steel fixings. 12VDC, 24VDC, 115VAC or 230VAC Versions. IP65. VdS Approved.

Configure

 
H100TX024G/A
(3589)

E2S  H100TX024G/A

E2S H100TX Trumpet Horn 100dB(A) and Xenon Strobe Beacon with 0.75Hz flash rate. Compact with high output signal to generate a traditional 'buzzer' warning or two further alarm sounds. Surface Mount. Volume control and Stainless Steel fixings. 24VDC/AC, 115 VAC or 230VAC Versions. IP65. GOST-R Approved.

Configure

 
AB105STRDC012G/A
(3597)

E2S  AB105STRDC012G/A

E2S AB105STR Alarm Sounder 112dB(A) and Xenon Strobe Beacon with 1Hz flash rate. Compact with high output signal. Automatic synchronisation. Stainless Steel fixings. 12VDC, 24VDC, 48VDC, 24VAC, 115 VAC or 230VAC Versions. IP65. VdS Approved.

Configure

 
AL100HDC024R/A
(4429)

E2S  AL100HDC024R/A

E2S AL100H Alarm Horn Sounder (A100) 104dB(A) and High Output LED Beacon (L101H). 24VDC. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

Configure

 
AL100XDC024R/R
(3551)

E2S  AL100XDC024R/R

E2S AL100X Alarm Horn Sounder (A100) 104dB(A) and 5 Joule Xenon Strobe Beacon (L101X). 115VAC, 230VAC, 24VAC, 24VDC or 48VDC Versions. Stainless steel fixings. Programmable version available. IP66. VdS and GOST-R Approved. Optional UL version.

Configure

 
AL100SONTELR/A
(5128)

E2S  AL100SONTELR/A

E2S AL100SONTELFLASH Telephone Initiated Alarm Sounder 100dB(A) and High Output 5 Joule Xenon Beacon. 230VAC. Stainless steel fixings. IP66. GOST-R Approved.

Configure

 
Page: 1 | 2 | 3 | 4 | 5 | All
() Reviews | Write One      
....

CU1HB024F06RNNNN     $2,342
MEDC / Alarm Signal Devices
Zone 1 And Zone 2 / Horn + Beacon
Contact Imprint Privacy Terms and Conditions Newsletter

Partners:
For inquiries relating to potential partnerships or joint venture ideas,
send an email to sales@GasDetectorsUSA.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines 		 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.